The engineering and construction center of drilling rigs is one of the five centers of science and technology academy of JDEVS in the field of design, engineering, construction and assembly of dredge drill rigs, electrical system and control of drill rigs in a special way, as well as doing key projects in hand Is active.
· Design and construction of dry drill rigs according to the employer's request
· Design and construction of a power system and control of drilling rigs in cooperation with Hill Graham UK (SCR & MCC SYSTEM)
· Design, construction and reconstruction of structures and substructures (MAST & SUBSTRUCTURE)
· Construction of all steel structures (CONSTRUCTION STEEL WORKS)
· Construction of all tanks of mud, fuel and water (MUD TANKS, FUEL TANKS, WATER TANKS)
· Providing all equipment and spare parts for electric and mechanical parts of dry drill rigs
· Design and engineering of construction of drilling rigs in accordance with employer's request
· Engineering and consulting of drilling rigs
· Supervising the construction and installation of drilling rigs
· Project Management Consultancy
onshore Oil drilling rig is one of the products of this center, which has been designed and manufactured since 2010. The localization of the first Rig is about 45%, which can increase up to 70% in future Rigs. The construction of the Mast & Sub, Mud Tanks, Water Tanks, Fuel Tanks and SCR & MCC System is in accordance with international standards in the 5,000-square-meter workshops. The center manufactures or provides the equipment with the design, engineering, construction and assembly capabilities according to the technical specifications and the AVL desired by the employer, and then manufacture the drill rig with an area of about 7000 square meters with facilities and equipment up to a capacity of 64 Ton, assembles all equipment and performs cabling and electricity operations. Possibility of Hot and cold testing, Rig Up and Rig Down operations at the Yard of Center in the presence of the employer's representatives. After construction and delivery, During the gurantee period, the electrical and mechanical experts of the center will be present full-time at the employer's Yard. in the warranty period, the required parts will be provided by this center. Technical Specifications: Type of Rig: Drill rig With an electric drive mast and substructure of swing up type based on API 4F standard Equipped with Power and Control System (SCR & MCC System) Draw works with a power of 2000 horsepower Maximum drilling depth 20,000 feet The height of the mast from the surface of the substructure is about 150 feet Structure of each drill pipe as 3 joints The height of the substructure from the ground surface is 29.5 feet Maximum static load tolerated by the Rig 1,000,000 pounds Equipped with a rotary table with a size of 37.5 inches Equipped with three reciprocating pumps with a power of 1600 hp Equipped with Hook, swivel, Crown Block, Traveling Block Equipped with a BOP system Equipped with fuel tanks, water tanks and mud tanks Equipped with Mud purification system Equipped with a driller cabin With the ability to install a Top drive Equipped with 4 Diesel Generators (CAT 3512B) Equipped with an emergency diesel generator (CAT C15) Equipped with two diesel camps (CAT C15)
onshore Oil drilling rig is one of the products of this center, which has been designed and manufactured since 2010. The localization of the first Rig is about 45%, which can increase up to 70% in future Rigs.
The construction of the Mast & Sub, Mud Tanks, Water Tanks, Fuel Tanks and SCR & MCC System is in accordance with international standards in the 5,000-square-meter workshops.
The center manufactures or provides the equipment with the design, engineering, construction and assembly capabilities according to the technical specifications and the AVL desired by the employer, and then manufacture the drill rig with an area of about 7000 square meters with facilities and equipment up to a capacity of 64 Ton, assembles all equipment and performs cabling and electricity operations. Possibility of Hot and cold testing, Rig Up and Rig Down operations at the Yard of Center in the presence of the employer's representatives. After construction and delivery, During the gurantee period, the electrical and mechanical experts of the center will be present full-time at the employer's Yard. in the warranty period, the required parts will be provided by this center.
Technical Specifications:
Type of Rig: Drill rig With an electric drive
mast and substructure of swing up type based on API 4F standard
Equipped with Power and Control System (SCR & MCC System)
Draw works with a power of 2000 horsepower
Maximum drilling depth 20,000 feet
The height of the mast from the surface of the substructure is about 150 feet
Structure of each drill pipe as 3 joints
The height of the substructure from the ground surface is 29.5 feet
Maximum static load tolerated by the Rig 1,000,000 pounds
Equipped with a rotary table with a size of 37.5 inches
Equipped with three reciprocating pumps with a power of 1600 hp
Equipped with Hook, swivel, Crown Block, Traveling Block
Equipped with a BOP system
Equipped with fuel tanks, water tanks and mud tanks
Equipped with Mud purification system
Equipped with a driller cabin
With the ability to install a Top drive
Equipped with 4 Diesel Generators (CAT 3512B)
Equipped with an emergency diesel generator (CAT C15)
Equipped with two diesel camps (CAT C15)
The power and control system of drilling rigs (SCR & MCC System) is one of the products of this center that has been designed and manufactured since the year 2001. The power system and control of drilling rigs in the center of engineering and construction of drilling rigs were 100% localized. The construction of a metal structure (SCR room), SCR units, MCC units and existing transformators are carried out in accordance with international standards at the 1000 square meter electric power. Other equipment is supplied as Plug & Recipient Plug and Air Condition system and installed in SCR room. The center manufactures or provides the equipment with the design, engineering, construction and assembly capabilities according to the technical specifications and the AVL desired by the employer, and then assembles all equipment in the SCR Assembly Assembly Workshop with facilities and equipment And perform cabling and electricity operations. Possibility of cold and hot testing at the workshop in the presence of employer's representatives. After construction and delivery, During the gurantee period, the electrical and mechanical experts of the center will be present full-time at the employer's Yard. in the warranty period, the required parts will be provided by this center.
The power and control system of drilling rigs (SCR & MCC System) is one of the products of this center that has been designed and manufactured since the year 2001. The power system and control of drilling rigs in the center of engineering and construction of drilling rigs were 100% localized.
The construction of a metal structure (SCR room), SCR units, MCC units and existing transformators are carried out in accordance with international standards at the 1000 square meter electric power.
Other equipment is supplied as Plug & Recipient Plug and Air Condition system and installed in SCR room. The center manufactures or provides the equipment with the design, engineering, construction and assembly capabilities according to the technical specifications and the AVL desired by the employer, and then assembles all equipment in the SCR Assembly Assembly Workshop with facilities and equipment And perform cabling and electricity operations.
Possibility of cold and hot testing at the workshop in the presence of employer's representatives. After construction and delivery, During the gurantee period, the electrical and mechanical experts of the center will be present full-time at the employer's Yard. in the warranty period, the required parts will be provided by this center.
